Cleaning The Rollers - Fujitsu fi-4860C Operator's Manual

3.3 Cleaning the Rollers

■ Cleaning the rollers with the cleaning sheet
1. Set the Side guide for B4 size width.
2. Set the scanner in Test mode: For the details of the procedure, refer to the
section "7.5 Test Mode Details" on page 221.
3. Press (Next button) to show the following screen.
4. Remove the protective paper from the cleaning sheet.
5. Place the cleaning sheet on the hopper table, aligning the left side with the
hopper guide and with the adhesive side up. Press
the cleaning sheet is fed.
48

3.3 Cleaning the Rollers

T
0 2 M u l t i f e e d
(Start button), then