Fujitsu fi-4860C Operator's Manual page 171

■ Precautions
The following documents may have difficulty being fed with this scanner. To prevent
unexpected problems, conduct preliminary feed testing using the same type of
paper as the target documents.
- Document with clips or staples (Not recommended)
- Document written on with ink and still wet
- Document without a constant thickness
- Document with bumps or curls (refer to the HINT on page 120)
- Document with folds or tears
- Tracing paper
- Coated paper
- Carbon paper
- Carbonless paper
- Document smaller than A7 or larger than A3
- Materials other than paper: fabric, metal foil, or transparencies.
- Photosensitive paper
- Perforated or punched documents
- Non-rectangular documents
- Very thin paper
HINT
148
6.2 Document Quality
- When scanning a translucent document, set the scanner den-
sity to light to avoid image bleed through.
- To prevent the rollers from getting dirty, avoid scanning docu-
ments containing large areas of written or documents filled in
with pencil. If scanning of such documents is necessary, clean
the rollers frequently.
- When document jams or double feed happens frequently ,
please refer to "5.1 Clearing Document Jams", "Document
separation force adjustment" on page 116.