Fujitsu fi-4860C Operator's Manual page 122

4. Install a new Pick roller unit in the reverse order of its removal.
HINT
Incorrect installation
5. Lower the ADF upper sheet guide carefully.
6. Lift the Upper transport unit fully to release the safety lock and then lower
the transport unit carefully.
7. Clear the Pick roller counter.
Please refer to the section "7.3 Setup Mode Details", "9. Abrasion counter reset"
on page 186.
When attaching the Pick roller unit, hold the unit as
shown. Engage the drive ring onto the drive shaft.
Move left and align the clutch ring with the shaft and
move right to engage.
Correct installation
4.4 Replacing the Pick Roller Unit
4
99