4.3 Cleaning the Rollers (using the
cleaning sheet)
Use the cleaning sheet to clean the upper and lower ADF transport path and the rollers.
1.
Open the Pre-Imprinter Cover when the power is off.
2.
While pressing the [Scan] button
switch on the scanner.
⇒ The function number display will change as shown below.
3.
Stop pressing the [Scan] button
⇒ The scanner will be started up in the test mode.
4.
Close the Pre-Imprinter Cover.
Scan
, press the power button
Scan
.
4.3 Cleaning the Rollers (using the cleaning sheet)
Pre-Imprinter Cover
4
to
107