Fujitsu fi-4860C Operator's Manual page 72

6. When [Hopper Empty] is displayed, press
7. Place the same cleaning sheet on the hopper table with adhesive side up by
aligning the right side with the hopper guide. Press
the cleaning sheet is fed.
8. When "Hopper Empty" is displayed, press
9. Remove the protective paper from a new cleaning sheet and place it with
the adhesive side face down.
Repeat steps 5 through 8. When the cleaning is completed turn off the
power.
(Stop button).
(Start button), then
(Stop button).
3.3 Cleaning the Rollers
3
49