Fujitsu fi-4860C Operator's Manual page 247

At <Screen50-1>, select [START], and press
If fi-486PRFR and/or fi-486PRREis installed, <Screen50-3> is displayed for
you to setup imprinter test conditions.
If an imprinter(s) is not installed, the scanner starts scanning operations.
6) At <Screen50-3>, press
Select [On] to do imprinter test while scanning.
Then select the imprinter to use.
If the printer to use is fi-486PRFR, select [Pre].
If fi-486PRRE, select [Post].
If imprinter test is not required, select [Off].
7) Press
test.
HINT
224
7.5 Test Mode Details
<Screen50-3>
= O f
(Left arrow button) or
(Start button). Scanning operation starts with or without imprinter
If you want to quit, press
LCD display goes back to <Screen50>.
(Start button).
P r i n t
f / O n : P r
(Right arrow button) and:
(Stop button).
e / P o s t