Fujitsu fi-4860C Operator's Manual page 119

5. Attach a new Pad ASSY by engaging the hooks then pressing scroll into the
slot of the Guide plate.
ATTENTION
6. Install the Guide plate in the reverse order of the removal. By pressing the
Guide plate down and pushing the Guide plate back then you can install it
smoothly.
7. Lower the ADF upper sheet guide gently.
8. Lift the Upper transport unit fully to release the safety lock and then lower
the transport unit carefully.
9. Clear the Pad counter.
Please refer to the section "7.3 Setup Mode Details", "9. Abrasion counter reset"
on page 186.
96
4.3 Replacing the Pad ASSY
Confirm that the pad is firmly attached to the guide. Make sure
that the two tabs are engaged with the Guide plate.
If not attached firmly, paper feed errors such as document jams
may happen.
Hooks