6. Attach the Lamp socket cover in the reverse order of its removal. Make sure
that the metal part is fixed firmly.
Lamp socket cover
7. Close the glass sheet guide. Make sure that the guide is fixed firmly.
8. Lift the Upper transport unit a little to release the safety lock and then lower
the transport unit slowly.
9. Clear the Front-side lamp counter.
Please refer to the section "7.3 Setup Mode Details", "9. Abrasion counter reset"
on page 186.
You can check the cumulative lamp-on time from the Operator
panel Test mode.
HINT
For the details, refer to the section "7.5 Test Mode Details,"
"3.Display the cumulative lamp-on time" on page 230.
4.6 Replacing the Front-side Lamp
4
107