Fujitsu fi-4860C Operator's Manual page 160

(* 1) For the details on required conditions, refer to the section "6.2 Document Quality"
on page 147.
(* 2) For the details on how to set up the Paper Length, refer to "7.3 Setup Mode Details",
"10. Setting Short document scan mode (Paper Length setup)" on page 189.
(* 3) For the details on how to clean ADF, refer to "Chapter 3 DAILY CARE" on page 41.
(* 4) For the details on how to replace Pas ASSY, refer to "Chapter4 REPLACING
CONSUMABLES" on page 89.
(* 5) For the details on scanner cleaning, refer to "Chapter 3 DAILY CARE" on page 41.
(* 6) For the replacement and re-installation of Pick roller unit and Brake roller unit,
please refer to "Chapter 4 REPLACING CONSUMABLES" on page 89.
(* 7) Check the consumable wear. For the method to check the number of sheets
scanned for each consumable, refer to "7.3 Setup Mode Details", "9. Abrasion
counter reset" on page 186.
5.2 Troubleshooting
5
137