Fujitsu fi-4860C Operator's Manual page 249

5) Specify the scanning conditions.
(1) At <Screen51-2>, select the left most item, [S] in the sample screen, and
press
At this screen, press
select simplex or duplex.
Press
Then the display goes back to <Screen51-2>.
(2) At <Screen51-2>, select the second item from left, [A4P] in the sample
screen, and press
<Screen51-2.2>.
At this screen, press
select the document size and the orientation. Following parameters can be
specified.
226
7.5 Test Mode Details
(Enter button). Then the LCD display shows <Screen51-2.1>.
<Screen51-2.1>
S I M P
(Left arrow button) or
(Enter button) and confirm the setting.
(Enter button). Then the LCD display shows
<Screen51-2.2>
P
(Left arrow button) or
L E
X / D
S I M P L E X
(Right arrow button) and
A P E R S I
A 4 P
(Right arrow button) and
P L E X
U
Z E