Fujitsu fi-4860C Operator's Manual page 209

9. Abrasion counter (Abrasion CNT) reset
1) Pressing
<Screen9>.
2) At <Screen9>, select the Abrasion counter to reset.
HINT
You can select a counter(s) from the following.
(1) [Pick] is blinking:
(2) [Brake] is blinking:
(3) [Pad] is blinking:
(4) [F.Lamp] is blinking: Front-side lamp counter (Front Lamp) can be reset.
(5) [B.Lamp] is blinking: Back-side lamp counter (Back Lamp) can be reset.
By pressing
By pressing
186
7.3 Setup Mode Details
(Next button) or (Previous button) and let the LCD show
<Screen9>
! 0 9
P i c
The blinking item is the one selected.
Pick roller counter (Pick CNT) can be reset.
Brake roller counter (Brake CNT) can be reset.
Pad counter (Pad CNT) can be reset.
(Right arrow button), selection moves from (1) to (5).
(Left arrow button), selection moves from (5) to (1).
A b r a s i
k / B r a k e
o n C N T
/ P a d