Removing The Fixing Film Unit - Canon iR4570 Series Service Manual

9.5.5.6 Removing the Fixing
Film Unit
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) While pushing down the release lever (front) [1],
pull out the heater contact [2].
F-9-114
2) While pushing down the release lever (rear) [1],
pull out the heater contact [2].
F-9-115
3) Remove the screw [1], and free the AC harness [2].
F-9-116
4) Free the AC harness [1] from the edge saddle [2].
0007-7929
5) Free the relay connector [1] of the signal cable from
the connector holder [2].
6) Disconnect the connector [2] from the relay
connector [1].
7) Remove the fixing film unit [1].
Chapter 9
F-9-117
F-9-118
F-9-119
9-37