Removing The Right Door - Canon iR4570 Series Service Manual

Chapter 8
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
[2]
[1]
F-8-161
8.8.8.2 Removing the Right
Door
iR3570 / iR4570 / iR3530
1) Open the right door.
F-8-162
2) Remove the screw [1], and detach the fixing plate
[2].
8-88
[3]
[3]
[3]
[4]
0007-6612
F-8-163
3) Remove the joint shaft [1], and free the extension
delivery unit [2] from the right door.
F-8-164
4) Disconnect the connector [1], and remove the reuse
band [2]; then, remove the 2 screws (M4x8; RS
tightening).
F-8-165
5) While freeing the hinge assembly [2], detach the
right door.