F-7-131
4) Free the cable from the edge saddle [1].
F-7-132
5) Remove the screw [1], and release the arm [2].
F-7-133
6) Remove the bushing unit [2] from the sub hopper
[1].
F-7-134
7) Disconnect the connector [1].
F-7-135
8) Detach the sub hopper [1] from the bottom.
F-7-136
7.12.5 Developing Assembly
7.12.5.1 Removing the Front
Cover Unit
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Open the front cover [1].
Chapter 7
0007-8022
7-49