Transmission/Reception Settings - Canon iR4570 Series Service Manual

Chapter 1
Mode
set fax
transmission
function
set fax
reception
settings***
set fax
expansion line

1.2.3.13 Transmission/Reception Settings

/ iR3530
*Factory default.
***Indicated when appropriate accessories are installed.
1-54
Description
ECM transmission (*ON/OFF)
set pause length: (*1 to 15 sec/4 to 11 sec/3 to 6 sec)
auto re-dial: (*ON/OFF)
number of redials: 100V: 1-15 (*2), 120V: 1-10 (*2), 230V: 1-10 (*2)
intervals for redials (min): 2-99 (*2)
redial at communication error: 1st page and error page/all pages/off
communication mode: *G4-G3/G3 only
check dial tone before transmission: (*ON/OFF)
ECM reception: (*ON/OFF)
select reception mode
fax/tel switchover: call start time: 0 to 30 sec (*8)
call length: 15 to 300 sec (*17)
operation after call: end/*receive
audio response: ON/*OFF
auto reception
modem dial-in fax/tel switchover
incoming ring: on (number of rings: 0 to N times)/*OFF
remote reception: on (remote reception ID: 00 to 99, 25)/*OFF
auto reception switch-over: on (length of ring: 1 to n sec)/*OFF
source record (G4): *add/do not add
source record position: inside image/*outside image
register user telephone No.: 20 characters max.
register user abbreviation: 24 characters max.
select line type: *20 pps/10pps push tone
select transmission line:
line 1: *priority on transmission/prohibit transmission
line 2: priority on transmission/prohibit transmission
0009-2501