Removing The Main Drive Assembly - Canon iR4570 Series Service Manual

10.5.1.3 Removing the Main
Drive Assembly
iR2270 / iR2870 / iR3530
1) Disconnect the 6 connectors [1].
2) Free the cable from the 6 cable clamps [2].
3) Remove the re-use band [3].
F-10-15
4) Remove the 4 screws [1], and detach the main drive
assembly [2].
0007-7367
10.5.2 Power Supply Unit
10.5.2.1 Removing the Rear
Cover
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
Chapter 10
F-10-16
0007-6375
10-21