Toshiba strata CT Installation & Maintenance Manual page 65

H
Figure 2-16
Bolt Cabinets to Concrete Floor
C
Figure 2-17
Strata CT I&M Manual October 2000
"A"
Front two
screws, left
and right sides
"B"
A B
Back two
screws, left
and right sides
A B
BFIF
Note
RWBF (3-pairs) and BFIF Stands (1-pair) are supplied with floor installation kit BFIF.
Floor Mounting Cabinet Installation
1. Mount the Strata CT Base Cabinet on Floor Mount Fixtures (see
2-17). Position the Base Cabinet at the selected installation location.
Bottom
Cabinet
BFIF
(Floor
mount
fixture)
Concrete
Floor
Installation on Concrete Floor
2. Mark the floor where holes will be drilled. Move the Base Cabinet prior to drilling.
Note Cover the Base Cabinet with a drop cloth to protect the power equipment from dust
created during drilling.
3. Use a hammer drill to make holes for 3/8-inch bolt anchors.
RWBFs are used on left and
right sides, wherever indicated
A B
RWBF
A B
B
A
RWBF
BFIF
Bolt
Lockwasher
Bolt Anchor
Plug
5242
Strata CT Installation
RWBF
A B
RWBF
A B
RWBF RWBF
A B
A B
RWBF
BFIF
5007
BFIFs are used on left and
right sides, wherever indicated
Figures 2-15 and
2-29