Toshiba strata CT Installation & Maintenance Manual page 237

Built-in Auto Attendant Installation
➤
To install the customer-supplied digital announcement devices
H
C
Figure 6-25
Strata CT I&M Manual October 2000
The built-in Auto Attendant feature only requires the installation of a feature key and
customer-supplied announcement devices to deliver announcements to callers. The feature
does not require the installation of any other devices.
Note
In Figure 6-25
as A1 and A2. A1 designates a primary announcement device, and A2 a secondary
announcement device. The prime marks following the designation distinguishes the
multiple announcers from each other.
1. Ensure that the PCB that will connect with the device is installed per:
Chapter 3 – Universal Slot PCBs
2. Connect the devices to the selected circuit per wiring diagrams:
N
Chapter 4 – Universal Slot PCB Wiring
3. Ensure that the feature key is correctly installed per:
N
Chapter 2 – Strata CT
4. Program the system per the instructions in
Sequences" on Page
5. Record the message and dialling prompts on the announcement device per the device
manufacturer's instructions.
To Standard Telephone Circuit
To Standard Telephone Circuit
To Standard Telephone Circuit
To Standard Telephone Circuit
Strata CT
RSTU or
PSTU
To Standard Telephone Circuit
To Standard Telephone Circuit
To Standard Telephone Circuit
To Standard Telephone Circuit
See Programs 23 and 24 for Digital Announcement Assignements
Primary Auto Attendant (AA) Announcements (A1, A1', A1'', A1''')
Secondary AA Announcements (A2, A2', A2'', A2''')
Announcement Device Block Diagram
and elsewhere in this manual, announcement devices are referred to
for the PSTU/RSTU
Installation, see BRCS on the BCU and RKYS installation
"Built-in Auto Attendant Basic Call
6-47.
MDF
Peripheral Installation
A1
Digital
Announcer
A2 Digital
Announcer
A1'
Digital
Announcer
A2'
Digital
Announcer
A1''
Digital
Announcer
A2''
Digital
Announcer
A1'''
Digital
Announcer
A2'''
Digital
Announcer
4308
6-49