Authentication-Key - Juniper EX9200 Features Manual

authentication-key

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
authentication-key key;
[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-id],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1x53-D20 for the OCX Series.
Configure a Virtual Router Redundancy Protocol (VRRP) IPv4 authentication key. You
also must specify a VRRP authentication scheme by including the
statement.
All routers in the VRRP group must use the same authentication scheme and password.
NOTE: When VRRPv3 is enabled, the
authentication-key
—Authentication password. For simple authentication, it can be 1 through 8 characters
key
long. For Message Digest 5 (MD5) authentication, it can be 1 through 16 characters
long. If you include spaces, enclose all characters in quotation marks (" ").
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP Authentication (IPv4 Only) on page 134
Configuring VRRP Authentication (IPv4 Only)
authentication-type on page 264
version-3 on page 282
Chapter 24: Configuration Statements: VRRP
vrrp-group group-id]
authentication-type
statements cannot be configured for any VRRP groups.
authentication-type
and
263