Fast-Interval - Juniper EX9200 Features Manual

fast-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
fast-interval milliseconds;
[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-id],
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet6 address address
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1x53-D20 for the OCX Series.
Configure the interval, in milliseconds, between Virtual Router Redundancy Protocol
(VRRP) advertisement packets.
All routers in the VRRP group must use the same advertisement interval.
—Interval between advertisement packets.
milliseconds
Range: 10 through 40,950 milliseconds (range extended from 100–999 to 10–40,950
in Junos OS Release 12.2).
NOTE: When configuring VRRP for IPv4, if you have chosen not to enable
VRRPv3, you cannot set a value less than 100 for
check fails if a value less than 100 is configured.
Default: 1 second
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Advertisement Interval for the VRRP Master Router on page 135
Configuring the Advertisement Interval for the VRRP Master
advertise-interval on page 261
advertise-interval on page 261
inet6-advertise-interval on page 270
version-3 on page 282
Chapter 24: Configuration Statements: VRRP
vrrp-group group-id],
vrrp-inet6-group group-id]
fast-interval . Commit
267