Hold-Time (Vrrp) - Juniper EX9200 Features Manual

hold-time (VRRP)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
hold-time seconds;
[edit interfaces interface-name unit logical-unit-number family inet address address
vrrp-group group-id preempt],
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id preempt],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet6 address address
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
In a Virtual Router Redundancy Protocol (VRRP) configuration, set the hold time before
a higher-priority backup router preempts the master router.
VRRP preemption is not timed.
—Hold-time period.
seconds
Range: 0 through 3600 seconds
Default: 0 seconds (VRRP preemption is not timed.)
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring a Backup Router to Preempt the VRRP Master Router on page 138
Configuring VRRP Preemption and Hold Time
Chapter 24: Configuration Statements: VRRP
vrrp-group group-id preempt],
vrrp-inet6-group group-id preempt]
269