Virtual-Link-Local-Address - Juniper EX9200 Features Manual

High Availability Feature Guide for EX9200 Switches

virtual-link-local-address

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
284
virtual-link-local-address ipv6-address;
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet6 address address
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS 11.3 for the QFX Series.
Configure a virtual link-local address for a Virtual Router Redundancy Protocol (VRRP)
IPv6 group. You must explicitly define a virtual link-local address for each VRRP for IPv6
group. The virtual link-local address must be in the same subnet as the physical interface
address.
NOTE: You do not need to configure link-local addresses and virtual link-local
addresses when configuring VRRP for IPv6. Junos OS automatically generates
link-local addresses and virtual link-local addresses. However, if link local
addresses and virtual link-local addresses are configured, Junos OS considers
the configured addresses.
—virtual link-local IPv6 address for VRRP for an IPv6 group.
ipv6-address
Range: 0 through 255
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Basic VRRP Support on page 130
Junos OS Support for VRRPv3 on page 121
vrrp-inet6-group group-id]
Copyright © 2017, Juniper Networks, Inc.