Configuration Statements: Nsb; Nonstop-Bridging - Juniper EX9200 Features Manual

CHAPTER 22

Configuration Statements: NSB

nonstop-bridging

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
nonstop-bridging on page 249
nonstop-bridging;
[edit protocols layer2-control]
Statement introduced in Junos OS Release 8.4.
For platforms with two Routing Engines, configure a master Routing Engine to switch
over gracefully to a backup Routing Engine and preserve Layer 2 Control Protocol (L2CP)
information.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Synchronizing the Routing Engine Configuration on page 54
Configuring Nonstop Bridging on page 31
For information about configuring NSB on EX Series switches that do not support the
Enhanced Layer 2 Software (ELS) CLI style, see Configuring Nonstop Bridging on EX
Series Switches (CLI Procedure)
For information about configuring NSB on switches that support ELS, see Configuring
Nonstop Bridging on Switches (CLI Procedure)
249