Juniper EX9200 Features Manual page 157

High availability feature guide ex series
Hide thumbs Also See for EX9200:
Table of Contents

Advertisement

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number family (inet | inet6) address
address (vrrp-group | vrrp-inet6-group) group-id]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number family (inet | inet6) address address (vrrp-group | vrrp-inet6-group)
group-id]
NOTE:
In the VRRP PDU, Junos OS sets the advertisement interval to 0. When
you configure VRRP with other vendors' routers, the
works correctly only when the other routers also have an advertisement
interval set to 0 in the VRRP PDUs. Otherwise, Junos OS interprets other
routers' settings as advertisement timer errors.
To modify the time, in milliseconds, between the sending of VRRP for IPv6 advertisement
packets, include the
inet6-advertise-interval
inet6-advertise-interval
ms;
The range of values is from 100 through 40,950 milliseconds (ms).
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number family inet6 address address vrrp-inet6-group group-id]
NOTE:
When VRRPv3 is enabled, the
cannot be used to configure advertisement intervals. Instead, use the
statement to configure advertisement intervals.
fast-interval
Understanding VRRP on page 119
Junos OS Support for VRRPv3 on page 121
Configuring Basic VRRP Support on page 130
Configuring a Backup Router to Preempt the VRRP Master Router on page 138
Modifying the Preemption Hold-Time Value for the VRRP Master Router on page 138
Configuring the Asymmetric Hold Time for VRRP Routers on page 139
Configuring the Silent Period to Avoid Alarms Due to Delay in Receiving VRRP
Advertisement Packets on page 146
Configuring VRRP on page 150
Chapter 14: Configuring VRRP
fast-interval
statement:
inet6-advertise-interval
statement
statement
137

Advertisement

Table of Contents
loading

Table of Contents