Checking The Transfer Gear Oil Level - Yamaha XV1600A1999 Service Manual

MEASURING THE ENGINE OIL PRESSURE/

CHECKING THE TRANSFER GEAR OIL LEVEL

Out of specification ! Adjust.
Engine oil pressure
Below specification
Broken or damaged
oil seal Above
specification
6. Install:
S oil gallery bolt
CHECKING THE TRANSFER GEAR OIL
LEVEL
1. Stand the motorcycle on a level surface.
NOTE:
S Place the motorcycle on a suitable stand.
S Make sure the motorcycle is upright.
2. Remove:
S checking bolt 1
3. Check:
S transfer gear oil level
The transfer gear oil level should be up to the
brim 1 of the hole.
Below the brim ! Add the recommended
transfer gear to the proper level.
Recommended oil
SAE80API "GL-4" Hypoid
gear oil
3-25
CHK
ADJ
Possible causes
S Faulty oil pump
S Clogged oil filter
S Leaking oil
passage
S Leaking oil
passage
S Faulty oil filter
S Oil viscosity too
high
20 Nm (2.0 mSkg)