Yamaha XV1600A1999 Service Manual page 369

CARBURETOR
NOTE:
S Install the end of the piston valve spring onto
the spring guide on the vacuum chamber cov-
er.
S Align the tab a on the piston valve diaphragm
with the recess in the carburetor body.
11. Install:
S coasting enricher 1
S coasting enricher spring
S coasting enricher cover 2
NOTE:
Align the tab a on the coasting enricher with the
recess b in the carburetor body.
12. Install:
S terminal 1
S washer
S carburetor heater 2
NOTE:
Use "Heat Sinker" when installing carburetor
heater.
Heat Sinker
13. Install:
S throttle position sensor bracket 1
S throttle cable holder 2
S vacuum chamber air vent hose 3
S fuel strainer 4
6-11
CARB
2.5 Nm (0.25 mSkg)
E