Special Tools - Yamaha XV1600A1999 Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers, or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Flywheel puller
90890-01080
This tool is used to remove the generator rotor.
T-handle T-handle
90890-01326 Damper rod holder
Damper rod These tools are used to hold the cartridge
holder cylinder when loosening or tightening the
90890-01294 cartridge cylinder bolt.
Fuel level gauge
90890-01312
This tool is used to measure the fuel level in
the float chamber.
Timing light
90890-03141
This tool is used to check the ignition
timing.
Belt tention gauge
90890-03170
This tool is used to measure the drive belt
slack.
Fork seal Fork seal driver weight
driver weight Adapter
90890-01367
Adapter These tools are used to install the front
90890-01374 fork's oil seal and dust seal.
Ignition checker
90890-06754
This tool is used to check the ignition
system components.
Valve spring compressor
90890-04019
This tool is used to remove or install the
valve assemblies.
SPECIAL TOOLS
Tool name/Function
1-9
GEN
INFO
Illustration