CLUTCH
NOTE:
While holding the generator rotor 2 with the
sheave holder 3 , loosen the pickup coil rotor
bolt.
Sheave holder
90890-01701
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the fric-
tion plates.
1. Check:
S friction plate
Damage/wear ! Replace the friction plates
as a set.
2. Measure:
S friction plate thickness
Out of specification ! Replace the friction
plates as a set.
NOTE:
Measure the friction plate at four places.
Friction plate thickness
2.9
<Limit>: 2.8 mm
EAS00281
CHECKING THE CLUTCH PLATES
The following procedure applies to all of the
clutch plates.
1. Check:
S clutch plate
Damage ! Replace the clutch plates as a
set.
2. Measure:
S clutch plate warpage
(with a surface plate and thickness gauge 1 )
Out of specification ! Replace the clutch
plates as a set.
Maximum clutch plate warpage
0.2 mm
5-66
ENG
3.1 mm
E