Yamaha XV1600A1999 Service Manual page 370

CARBURETOR
14. Install:
S throttle stop screw
S drain hose
INSTALLING THE CARBURETOR JOINT
1. Install:
S carburetor joint 1
2. Connect:
S vacuum hose 2
EAS00492
INSTALLING THE CARBURETOR
1. Connect:
S carburetor heater connectors 1
S charcoal canister hose (carburetor to char-
coal canister) 2
2. Install:
S starter plunger
3. Connect:
S starter cable 1
4. Install:
S throttle position sensor 1
NOTE:
S Align the slot a of the throttle position sensor
with the projection b of the throttle lever shaft.
S For the correct installation, refer to "CHECK-
ING AND ADJUSTING THE THROTTLE
POSITION SENSOR".
6-12
CARB
12 Nm (1.2 mSkg)
E