CHECKING THE FRONT BRAKE PADS/ CHECKING THE REAR BRAKE
PADS/ ADJUSTING THE REAR BRAKE LIGHT SWITCH
EAS00120
CHECKING THE FRONT BRAKE PADS
The following procedure applies to all of the
brake pads.
1. Operate the brake.
2. Check:
S brake pad
Wear indicator groove 1 almost disap-
peared ! Replace the brake pads as a set.
Refer to "REPLACING THE FRONT BRAKE
PADS" in chapter 4.
Brake pad wear limit a
0.5 mm
EAS00118
CHECKING THE REAR BRAKE PADS
The following procedure applies to all of the
brake pads.
1. Operate the brake.
2. Check:
S brake pad
Wear indicators 1 almost touch the brake
disc ! Replace the brake pads as a set.
Refer to "REPLACING THE REAR BRAKE
PADS" in chapter 4.
Brake pad wear limit a
0.5 mm
EAS00128
ADJUSTING THE REAR BRAKE LIGHT
SWITCH
NOTE:
The rear brake light switch is operated by move-
ment of the brake pedal.
The rear brake light switch is properly adjusted
when the brake light comes on just before the
braking effect starts.
3-34
CHK
ADJ