Xerox Phaser 6180 Service Manual page 368

Print-Quality Troubleshooting
5-50
Troubleshooting Procedure Table (continued)
Step Action and Questions
4 Check the Print Cartridge (C/M/Y/K)
for correct installation. Reseat the
Print Cartridge.
Does the error still occur?
5 Check the skewed tray. Is the skewed
paper fed from Tray 1 (MPT)?
Check the paper for correct placement.
6
Reseat the paper.
Does the error still occur?
7 Check the Tray 1 (MPT) Side Guides.
Reset the Side Guides.
Does the error still occur?
Check the paper path. Are there any
8
debris on the paper path?
9 Replace the Tray 1 (MPT) Feed Roll
(page 8-39).
Does the error still occur?
Replace the Feeder Unit (page 8-43).
10
11 Check the skewed mode. Is the
skewed paper fed the from the
Duplex?
Check the Duplex Unit for correct
12
installation. Reseat the Duplex Unit.
Does the error still occur?
Check the paper path. Are there any
13
debris on the paper path?
14 Check the paper tray for correct
installation. Reseat the tray.
Does the error still occur?
Check the paper for correct placement.
15
Reseat the paper in the tray.
Does the error still occur?
16 Check the paper tray Side Guides.
Reset the Side Guides.
Does the error still occur?
17 Check the paper path. Are there any
debris on the paper path?
Replace the Feed Roll (Tray 2,
18
page 8-49) (Tray 3, page 8-104).
Does the error still occur?
Yes
Go to step 5.
Go to step 6.
Go to step 7.
Go to step 8.
Remove the
debris.
Replace the Tray
2 Retard Roll
(page 8-33).
Go to step 11.
Go to step 12.
Go to step 13.
Remove the
debris.
Go to step 15.
Go to step 16.
Go to step 17.
Remove the
debris.
Replace the
Retard Roll (Tray
2, page 8-33)
(Tray 3,
page 8-109).
Phaser 6180 Color Laser Printer Service Manual
No
Complete.
Go to step 10.
Complete.
Complete.
Go to step 9.
Complete.
Complete.
Go to step 14.
Complete.
Replace the
Duplex Unit
(page 8-94).
Complete.
Complete.
Complete.
Go to step 18.
Complete.