Xerox Phaser 6180 Service Manual page 324

Print-Quality Troubleshooting
5-6
2. Print is too light.
Light or Undertone Print
a. The toner may be too low. Check the amount of toner and change the
Print Cartridges if necessary.
b. In the printer Printing Preferences menu,
Draft Mode, verify Off is selected.
c. If you are printing on an uneven print surface, change the paper type
settings in the Tray Settings menu.
d. Verify that the correct type of paper is being used.
3. Toner smears or print comes off page.
Smudges or Smears
a. If you are printing on an uneven print surface, change the Media Type
settings in the Tray Settings menu.
b. Verify that the paper is within the printer specifications (refer to
"Media and Tray Specifications" on page 1-22).
Advanced
Phaser 6180 Color Laser Printer Service Manual
> Details >