Controller System Error - Xerox Phaser 6180 Service Manual

Error Messages and Codes

Controller System Error

Applicable Chain Link
Initial Actions
3-102
The printer controller has detected error.
■
Chain Link 116-310: Font ROM Error (Main)
■
Chain Link 116-311: Font ROM Error (Option)
■
Chain Link 116-314: MAC Address Error
■
Chain Link 116-315: RAM Error (On Board RAM W/R Check Fail)
■ Chain Link 116-317: Controller Error (ROM Check Fail) (Main)
■
Chain Link 116-323: NVRAM Error (NVRAM1 W/R Check Fail)
■ Chain Link 116-324: Controller Error (Illegal Exception)
■ Chain Link 116-326: NVRAM Error (NVRAM2 W/R Check Fail)
■ Chain Link 116-327: Controller Error (Instruction Cache Error)
■ Chain Link 116-328: Controller Error (Data Cache Error)
■ Chain Link 116-343: ASIC Error (ASIC Fail)
■ Chain Link 116-390: NVRAM Error (NVRAM1 Size and ID Check Fail)
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the Image Processor Board for
correct installation. Is the Image
Processor Board correctly installed?
2 Does the error still occur?
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Replace the
Image
Processor Board
(page 8-89).
Phaser 6180 Color Laser Printer Service Manual
No
Reseat the
Image
Processor
Board.
Complete.