Firmware Update; Boot Controller Update - Xerox Phaser 6180 Service Manual

Firmware Update

Boot Controller Update

Phaser 6180 Color Laser Printer Service Manual
Note
Boot Code can be updated via USB or Parallel port only.
1. Down load applicable files from the Xerox support web site.
2. Turn off the printer.
3. Ensure your appropriate downloading cable option (USB or Parallel) is
connected.
4. Press the Up Arrow, Down Arrow, and Menu buttons simultaneously
and turn on the printer.
5. The FW Update Password
6. Press the Down Arrow button 2 times.
7. Press the OK button.
8. The F/W Download
9. Select the appropriate method
Press the OK button.
10. The serial number of the printer is displayed. Then the
Send F/W Data is displayed.
11. On your computer, locate the downloaded file. Open the Boot directory.
Double-click the Xeroxfwup.exe file.
12. Select the appropriate method
13. The xeroxfwup window with the module number is displayed. Click the
Next button.
14. On the printer Control Panel, the
message is displayed. The the printer starts updating the firmware.
Caution
Do Not reboot or turn off the printer. The printer will automatically reboot.
12. When the process is completed, the following messages are displayed on
the printer Control Panel.
■
Xerox (TM) Print Cartridge
■
Processing... Ready
13. Print the printer Configuration page
Configuration) and verify the Boot Version information.
is displayed.
is displayed.
(DL Mode Parallel
(USB or Parallel). Click the Next button.
Erasing Flash...
(Menu >
Reference
or DL Mode USB).
DownLoad Mode
--> Diagnosing
Information Pgs >
A-3