Xerox Phaser 6180 Service Manual page 256

General Troubleshooting
4-22
Service Diagnostic Test Table (continued)
Test Control Panel Display
Clear All NVM Clear All NVM
OK?
■
Processing
■
Initialized
■
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Clear Job Clear JobHistory
History
OK?
■
Processing
■
Initialized
■
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Clear Clear AuditronPV
Auditron PV
OK?
■
Processing
■
Initialized
■
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Test Print Provides various test prints to be used for troubleshooting the
printer.
Menu Buttons
<Press the Up or Down
button to switch from
one item to another>
<Press the Cancel button
to move one/two level(s)
up the menu>
<Press the Set button to
run the test>
No Image IOT No Image IOT
Ready
■
Processing
■
Test Pat600 IOT TestPat600 IOT
Ready
■
Processing
■
Grid 2 ESS Grid 2 ESS
Ready
■
Processing
■
Test Description
Clears all NVRAM of the Controller
including billing.
Deletes the job history data.
Note: Job History can also be
initialized by Clear All
Initializes Auditron or Print Volume.
Print Volume and Auditron work
exclusively and share the setting
memory area.
When Auditron is enabled, user
account and restricted information is
cleared.
When Print Volume is enabled, Print
Volume Counter is initialized.
Note: AuditronPV can also be initialized
by Clear All NVM.
Prints a blank page.
Prints the printer built-in Test Pattern
600 DPI. This test checks the print
function of the printer.
Prints the Controller built-in grid
pattern. This test checks the print
function of the printer.
Phaser 6180 Color Laser Printer Service Manual
NVM.