Communications Reporting Codes; System Test Options [026 - 029] - DSC 3G2055 Installation Manual

Hspa/3g wireless alarm communicator ethernet/internet and hspa/3g dual-path alarm communicator
Hide thumbs Also See for 3G2055:
Table of Contents

Advertisement

Table 9: Communications Reporting Codes
Event
[023] Panel Absent Trouble
[024] Panel Absent Trouble
Restore
[025] Radio Activation
Restore
[026] Ethernet 1 Test Trans-
mission
[027] Ethernet 2 Test Trans-
mission
[028] Cellular 1 Test Trans-
mission
[029] Cellular 2 Test Trans-
mission
[030] FTC Restore
[023] Panel Absent Trouble
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur when
communications with the panel have been lost for more than 60 seconds.
[024] Panel Absent Trouble Restore
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur when
communications with the control panel have resumed.
[025] Radio Activation Restore
Default (FF)
Program 00 to disable this event or FF to enable. This event will occur after any suc-
cessful Connect24 programming session.
Test Transmissions to Primary Receiver, with Backup to Secondary Receiver:
Set Ethernet Section [026] to (FF); [027] to (00). Set Cellular Section [028] to (FF);
[029] to (00).
• If the test transmission fails to the primary receiver it will backup to the secondary
receiver.
• If the test transmission fails to the secondary receiver an FTC trouble will be
generated.
Test Transmission Unique to Primary and Secondary Receivers:
Set Ethernet Section [026] to (FF); [027] to (FF). Set Cellular Section [028] to (FF);
[029] to (FF).
• The module will send periodic test transmissions to each receiver independently,
with no backups.
• If the test transmission fails to any of the programmed receivers, an FTC trouble
will be generated.
Alternate Test Transmission:
Alternate Test Transmission can be enabled or disabled in Section [005] Toggle Option
[7].
[026] Ethernet 1 Transmission
Default (FF)
Program 00 to disable this event transmission or FF to enable. See System Test
Options (above) for details on settings.
C
OMMUNICATIONS
SIA
SIA
Reporting
Identifier
Code
ET
001
ER
001
RS
001
RP
001
RP
002
RP
003
RP
004
YK
001
S
T
YSTEM
EST
R
EPORTING
CID
Qualifier
1
3
3
3
3
5
1
6
1
6
1
6
1
6
3
3
O
[026 - 029]
PTIONS
24
C
ODES
CID
CID
Event
Reporting
Code
Code
55
55
52
A3
A3
A3
A3
54
CID
User/
Zone
001
001
001
951
952
955
956
001

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl2553g

Table of Contents