Table of Contents
Advertisement
CAUTION :
• Do not stay close to the equipment during device operation and to do not touch
any exposed wires and other conductive surfaces,
• Recycle the battery according to the local rules and regulations.
NOTE: Prior to installation of the 3G2055 or TL2553G Communicator, confirm with
your local carrier that the HSPA/3G network is available and active in the area where
the Communicator will be installed, and that the location provides a radio signal
strength that is adequate for uninterrupted service.
• 128-bit Advanced Encryption Standard (AES) encryption via HSPA/3G and
Ethernet/Internet.
• Activating, initializing and remote programming through C24 Communications.
• Back up or primary HSPA/3G/2G alarm communication.
• Does not require an external HSPA/3G/2G antenna.
• Ethernet LAN/WAN 10/100 BaseT (TL2553G only).
• Full event reporting to central station.
• Fully
redundant
Communication (TL2553G only).
• Individual Ethernet and/or HSPA/3G periodic test transmission.
• 2-way audio (listen-in feature) provided over Cellular.
• Integrated call routing.
• Remote Firmware upgrade capability of the Communicator and Panel Firmware via
Ethernet and/or HSPA/3G radio.
• Dual-Band Operation: 850 MHz, and 1900 MHz. (North America only)
• CID and SIA format reporting.
• Subscriber Identity Module (SIM) card included with Communicator. (North
America only)
• Supervision heartbeats via HSPA/3G/2G and/or Ethernet/Internet.
• For ULC Residential fire and burglary applications the 3G2055/TL2553G can be
used as primary communication channel via either Cellular or Ethernet (as
applicable) or as a back-up in conjunction with the Digital Alarm Communicator
Transmitter (DACT). Test transmission every 24hours shall be enabled on each
channel.
• For UL Residential fire and burglary applications the 3G2055/TL2553G can be
used as primary communication channel via either Cellular or Ethernet, or as a
back-up in conjunction with the DACT. (30 day test transmission is required on each
channel).
C
OMMUNICATOR
Table 1: 2G Frequency Bands
Transmit Direction
Transmit Frequency
Receive Frequency
Table 2: 3G Frequency Bands
Transmit Direction
Transmit Frequency
Receive Frequency
Ethernet/Internet
UL/ULC I
NSTALLATION
F
REQUENCY
Cellular 850 North America
824 MHz to 849 MHz
869 MHz to 894 MHz
UMTS 850 North America,
International
824 MHz to 849 MHz
869 MHz to 894 MHz
F
EATURES
and
HSPA/3G/2G
R
EQUIREMENTS
B
ANDS FOR
1850 MHz to 1910 MHz
1930 MHz to 1990 MHz
UMTS 1900 North America
1850 MHz to 1910 MHz
1930 MHz to 1990 MHz
7
Dual-path
N
A
ORTH
MERICA
PCS 1900 North America
Alarm
Advertisement
Table of Contents
