General Information; Keypad Data Display; Entering Data From Keypad; Entering Ascii Characters - DSC 3G2055 Installation Manual

Hspa/3g wireless alarm communicator ethernet/internet and hspa/3g dual-path alarm communicator
Hide thumbs Also See for 3G2055:
Table of Contents

Advertisement

i
Domain Name Service (DNS) programming is not permitted in UL/ULC listed
systems.
• Section-Toggle Options: The number is displayed when Toggle is ON. The
number is not displayed when Toggle is OFF . (e.g., Toggle Options displays: "[--3-
-6--]" . Options 3 and 6 are ON, all others are OFF). Pressing keys 1 through 8 will
alternately turn the Toggle ON and OFF .
• HEX/Decimal Data: Values that are provided with two defaults, separated by a /
character, use the format: hexadecimal followed by decimal equivalent (e.g.,
Default [0BF5/3061]). Hexadecimal numbers are shown, with all leading zeroes, to
the full field length defined for the number.
To enter data at the keypad, press the number key, from the table below, to select the
character that you want. Pressing the number key repeatedly will scroll through the
characters available for that key. Press the [*] key and use [<] [>] keys to scroll to one
of the following selections: (Press [*] to select the Option.)
• ASCII Entry. Use this mode to enter ASCII characters from the keypad.
• Clear to End. This selection will clear the remainder of the display.
• Clear Display.This selection will completely erase all entries on the display.
• Change Case. Toggles between upper/lower case depending on current selection.
NOTE: The "0" on the keypad is used to delete characters.
Table 7: Data Entry at Keypad
Key
Value
1
1-A-B-C
2
2-D-E-F
3
3-G-H-I
To enter American Standard Code for Information Interchange (ASCII) characters at
the keypad, perform the following:
1. Press [*] and use [<] [>] keys to scroll to " ASCII Entry" .
2. Press [*] to select ASCII entry mode.
3. Use the [<] [>] keys to scroll to display the ASCII character you want to use and
press [*] to accept.
4. Press [*] to exit ASCII character entry mode and return to normal entry.
NOTE: Authorized access to Connect24 (3G2055/TL2553G) is required to modify any
Ethernet/Cellular Programming Section. Specific panel sections must be configured
for proper operation of the Communicator with the panel.
G
ENERAL
K
EYPAD
E
NTERING
Ke
Key
Value
4
4-J-K-L
7
5
5-M-N-O
8
6
6-P-Q-R
9
E
NTERING
I
NFORMATION
D
D
ATA
ISPLAY
D
F
K
ATA
ROM
Value
y
7-S-T-U
8-V-W-X
9-Y-Z-0
ASCII C
HARACTERS
15
EYPAD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl2553g

Table of Contents