Alarm/Restoral Reporting Codes; Misc. Alarm Reporting Codes; Priority Alarm And Restoral Reporting Codes; Misc. Tamper Codes - DSC Envoy NT9005EU Installation & Programming Manual

Advanced Programming

[320]-[327] Alarm/Restoral Reporting Codes

These reporting codes are used by the communicator to transmit
zone alarms and restorals for zones 01-32. They are sent to the
Alarms and Restorals Call Direction Group programmed in section
[361]
Alarms
Zone Section/Entry
01 [320] I___I___I
02 I___I___I
03 I___I___I
04 I___I___I
05 I___I___I
06 I___I___I
07 I___I___I
08 I___I___I
09 [321] I___I___I
10 I___I___I
11 I___I___I
12 I___I___I
13 I___I___I
14 I___I___I
15 I___I___I
16 I___I___I
17 [322] I___I___I
18 I___I___I
19 I___I___I
20 I___I___I
21 I___I___I
22 I___I___I
23 I___I___I
24 I___I___I
25 [323] I___I___I
26 I___I___I
27 I___I___I
28 I___I___I
29 I___I___I
30 I___I___I
31 I___I___I
32 I___I___I
34
Alarm Restorals
Section/Entry
[324] I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
[325] I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
[326] I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
[327] I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
I___I___I
firealarmresources.com

[328] Misc. Alarm Reporting Codes

These codes are sent to the Alarm and Restorals Call Direction
Group programmed in section [361].
I___I___I Duress Alarm
This code will be sent when a duress code is used to per-
form a function on the system.
I___I___I Opening after Alarm
This code will be sent on Opening if an alarm occurred
during the previous armed period.
I___I___I Recent Closing
This code is sent if an alarm occurs within two minutes
of exit time expiration. This is sent for the first alarm.
I___I___I Future Use
I___I___I Future Use
I___I___I Cross Zone Police Code Alarm
Refer to section [017], option 4

[329] Priority Alarm and Restoral Reporting Codes

These codes are sent to the Alarm and Restorals Call Direction
Group programmed in section [361].
I___I___I Keypad [F]ire Alarm
This code is sent when the [F] key is pressed
I___I___I Keypad [A]uxiliary Alarm
This code is sent when the [A] key is pressed
I___I___I Keypad [P]anic Alarm
This code is sent when the [P] key is pressed
I___I___I Future Use
I___I___I Keypad [F]ire Restoral
I___I___I Keypad [A]uxiliary Restoral
I___I___I Keypad [P]anic Restoral
I___I___I Future Use

[338] Misc. Tamper Codes

These codes are sent to the Tamper Alarm and Restorals Call Direc-
tion Group programmed in section [363].
I___I___I General System Tamper
This code is sent when a tamper exists on the main panel or
a module. This code is sent in addition to the specific tamper.
I___I___I General System Tamper Restoral
I___I___I Keypad Lockout - This code is sent when the
system enters keypad lockout.