Configuring Fibre Channel Routing Services and Protocols
DETAILED STEPS
Command or Action
Step 1
clear fspf counters vsan vsan-id
Example:
switch# clear fspf counters vsan 345
FSPF Interface Configuration
Several FSPF commands are available on a per-interface basis. These configuration procedures apply to an
interface in a specific VSAN.
FSPF Link Cost
FSPF tracks the state of links on all switches in the fabric, associates a cost with each link in its database, and
then chooses the path with a minimal cost. The cost associated with an interface can be administratively
changed to implement the FSPF route selection. The integer value to specify cost can range from 1 to 65,535.
The default cost for 1 Gbps is 1000 and for 2 Gbps is 500.
Configuring FSPF Link Cost
You can configure FSPF link cost.
SUMMARY STEPS
1. configure terminal
2. switch(config)# interface fc slot/port
3. fspf cost value vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
switch(config)# interface fc slot/port
OL-27583-01
Purpose
Clears the FSPF statistics counters for the specified VSAN. If
an interface reference is not specified, all counters are cleared.
Purpose
Enters global configuration mode.
Configures the specified interface, or if already configured,
enters configuration mode for the specified interface.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
FSPF Interface Configuration
185