Configuring and Managing VSANs
Figure 30: VSAN Port Membership Details
• VSAN-based runtime (name server), zoning, and configuration (static routes) information is removed
• Configured VSAN interface information is removed when the VSAN is deleted.
The allowed VSAN list is not affected when a VSAN is deleted.
Note
Any commands for a nonconfigured VSAN are rejected. For example, if VSAN 10 is not configured in the
system, a command request to move a port to VSAN 10 is rejected.
Related Topics
Configuring VSAN Trunking, on page 85
Deleting Static VSANs
You can delete a VSAN and its various attributes.
SUMMARY STEPS
1. configure terminal
2. vsan database
3. vsan vsan-id
4. switch(config-vsan-db)# no vsanvsan-id
5. switch(config-vsan-db)# end
OL-27583-01
the ports do not automatically get assigned to that VSAN. You must explicitly reconfigure the port
VSAN membership (see the figure below).
when the VSAN is deleted.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Guidelines and Limitations for VSANs
125