Fspf Routes; Fibre Channel Routes; Configuring Fibre Channel Routes - Cisco Nexus 5000 Series Configuration Manual

FSPF Routes

DETAILED STEPS
Command or Action
Step 1
switch# clear fspf counters vsan vsan-id interface fc
slot/port
FSPF Routes
FSPF routes traffic across the fabric, based on entries in the FSPF database. These routes can be learned
dynamically or configured statically.

Fibre Channel Routes

Each port implements a forwarding logic, which forwards frames based on its FC ID. Using the FC ID for
the specified interface and domain, you can configure the specified route (for example, FC ID 111211 and
domain ID 3) in the switch with domain ID 1 (see the following figure).
Figure 38: Fibre Channel Routes

Configuring Fibre Channel Routes

You can configure a Fibre Channel route.
SUMMARY STEPS
1. configure terminal
2. fcroute fcid interface fc slot/port domain domain-id vsan vsan-id
3. fcroute fcid interface san-port-channel port domain domain-id vsan vsan-id
4. fcroute fcid interface fc slot/port domain domain-id metric value vsan vsan-id
5. fcroute fcid interface fc slot/port domain domain-id metric value remote vsan vsan-id
6. fcroute fcid netmask interface fc slot/port domain domain-id vsan vsan-id
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
190
Configuring Fibre Channel Routing Services and Protocols
Purpose
Clears the FSPF statistics counters for the specified interface
in the specified VSAN.
OL-27583-01