Configuring A Server Interface; Configuring Npv Traffic Management; Configuring Npv Traffic Maps - Cisco Nexus 5000 Series Configuration Manual

Configuring NPV
DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# interface fc slot/port
Step 3 switch(config-if)# switchport mode NP
Step 4 switch(config-if)# no shutdown

Configuring a Server Interface

To configure a server interface, perform this task:
SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# interface fc slot/port
3. switch(config-if)# switchport mode F
4. switch(config-if)# no shutdown
DETAILED STEPS
Command or Action
Step 1 switch# configure terminal
Step 2 switch(config)# interface fc slot/port
Step 3 switch(config-if)# switchport mode F
Step 4 switch(config-if)# no shutdown

Configuring NPV Traffic Management

Configuring NPV Traffic Maps

An NPV traffic map associates one or more NP uplink interfaces with a server interface. The switch associates
the server interface with one of these NP uplinks.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
62
Configuring N Port Virtualization
Purpose
Enters global configuration mode.
Selects an interface that will be connected to the core
NPV switch.
Configures the interface as an NP port.
Brings up the interface.
Purpose
Enters global configuration mode.
Selects an interface that will be connected to the core
NPV switch.
Configures the interface as an F port.
Brings up the interface.
OL-27583-01