Displaying The In-Order Delivery Status; Configuring The Drop Latency Time - Cisco Nexus 5000 Series Configuration Manual

Configuring Fibre Channel Routing Services and Protocols

Displaying the In-Order Delivery Status

Use the show in-order-guarantee command to display the present configuration status:
switch# show in-order-guarantee
global inorder delivery configuration:guaranteed
VSAN specific settings
vsan 1 inorder delivery:guaranteed
vsan 101 inorder delivery:not guaranteed
vsan 1000 inorder delivery:guaranteed
vsan 1001 inorder delivery:guaranteed
vsan 1682 inorder delivery:guaranteed
vsan 2001 inorder delivery:guaranteed
vsan 2009 inorder delivery:guaranteed
vsan 2456 inorder delivery:guaranteed
vsan 3277 inorder delivery:guaranteed
vsan 3451 inorder delivery:guaranteed
vsan 3452 inorder delivery:guaranteed

Configuring the Drop Latency Time

You can change the default latency time for a network, a specified VSAN in a network, or for the entire switch.
SUMMARY STEPS
1. configure terminal
2. fcdroplatency network value
3. fcdroplatency network value vsan vsan-id
4. no fcdroplatency network value
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 fcdroplatency network value
Example:
switch(config)# fcdroplatency network 1000
Step 3 fcdroplatency network value vsan vsan-id
Example:
switch(config)# fcdroplatency network 1000
vsan 12
OL-27583-01
Purpose
Enters global configuration mode.
Configures network drop latency time for the network. The
valid range is from 0 to 60000 msec. The default is 2000 msec.
Note
Configures network drop latency time for the specified VSAN.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
The network drop latency must be computed as the
sum of all switch latencies of the longest path in the
network.
In-Order Delivery
195