Disabling Auto-Learning - Cisco Nexus 5000 Series Configuration Manual

Configuring Port Security
Tip If auto-learning is enabled on a VSAN, you can only activate the database for that VSAN by using the
force option.
SUMMARY STEPS
1. configure terminal
2. port-security auto-learn vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
port-security auto-learn vsan vsan-id
Example:
switch(config)# port-security auto-learn vsan
1

Disabling Auto-Learning

You can disable auto-learning.
SUMMARY STEPS
1. configure terminal
2. no port-security auto-learn vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
OL-27583-01
Purpose
Enters global configuration mode.
Enables auto-learning so the switch can learn about any
device that is allowed to access VSAN 1. These devices are
logged in the port security active database.
Purpose
Enters global configuration mode.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Auto-Learning
261