Activating A Port Monitor Policy; Displaying Port Monitor Policies - Cisco Nexus 5000 Series Configuration Manual

Fibre Channel Slow Drain Device Detection and Congestion Avoidance- An Overview
switch(config-port-monitor)# counter credit-loss-reco poll-interval 20 delta rising-threshold
10 event 4 falling-threshold 3 event 4

Activating a Port Monitor Policy

SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# port-monitor activate policyname
3. (Optional) switch(config)# port-monitor activate
4. (Optional) switch(config)# no port-monitor activate policyname
DETAILED STEPS
Command or Action
Step 1
switch# configure terminal
Step 2
switch(config)# port-monitor activate policyname
Step 3 switch(config)# port-monitor activate
Step 4 switch(config)# no port-monitor activate policyname
This example shows how to activate a specific port monitor policy:
switch# configure terminal
switch(config)# port-monitor activate cisco

Displaying Port Monitor Policies

Use the following command to display port monitor policies:
Command
switch# show port-monitor policyname
This example shows how to display a specific port monitor policy:
OL-27583-01
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
Purpose
Enters global configuration mode.
Activates the specified port monitor policy.
(Optional)
Activates the default port monitor policy.
(Optional)
Deactivates the specified port monitor policy.
Purpose
Displays details of the specified port monitor policy.
Port Monitoring
301