Activation And Auto-Learning Configuration Distribution - Cisco Nexus 5000 Series Configuration Manual

Port Security Configuration Distribution
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 port-security abort vsan vsan-id
Example:
switch(config)# port-security abort vsan 35

Activation and Auto-Learning Configuration Distribution

Activation and auto-learning configurations in distributed mode are remembered as actions to be performed
when you commit the changes in the pending database.
Learned entries are temporary and do not have any role in determining if a login is authorized or not. As such,
learned entries do not participate in distribution. When you disable learning and commit the changes in the
pending database, the learned entries become static entries in the active database and are distributed to all
switches in the fabric. After the commit, the active database on all switches are identical and learning can be
disabled.
If the pending database contains more than one activation and auto-learning configuration when you commit
the changes, the activation and auto-learning changes are consolidated and the resulting operation may change
(see the following table).
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
268
Purpose
Enters global configuration mode.
Discards the port security changes in the specified VSAN
and clears the pending configuration database.
Configuring Port Security
OL-27583-01