Clearing Fspf Counters For The Vsan; Fspf Interface Configuration; About Fspf Link Cost; Configuring Fspf Link Cost - Cisco Nexus 5000 Series Configuration Manual

FSPF Interface Configuration

Clearing FSPF Counters for the VSAN

To clear the FSPF statistics counters for the entire VSAN, perform this task:
SUMMARY STEPS
1. switch# clear fspf counters vsan vsan-id
DETAILED STEPS
Command or Action
Step 1 switch# clear fspf counters vsan vsan-id
FSPF Interface Configuration
Several FSPF commands are available on a per-interface basis. These configuration procedures apply to an
interface in a specific VSAN.

About FSPF Link Cost

FSPF tracks the state of links on all switches in the fabric, associates a cost with each link in its database, and
then chooses the path with a minimal cost. The cost associated with an interface can be administratively
changed to implement the FSPF route selection. The integer value to specify cost can range from 1 to 65,535.
The default cost for 1 Gbps is 1000 and for 2 Gbps is 500.

Configuring FSPF Link Cost

To configure FSPF link cost, perform this task:
SUMMARY STEPS
1. switch# configuration terminal
2. switch(config)# interface fc slot/port
3. switch(config-if)# fspf cost value vsan vsan-id
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide
148
Configuring Fibre Channel Routing Services and Protocols
Purpose
Clears the FSPF statistics counters for the specified VSAN. If an
interface reference is not specified, all counters are cleared.
OL-xxxxx-xx