P62, P80, And P82 Series Console; About Menu - Precor TRM700-16 Base Service Manual

CLUB PARAMETER
SET CUSTOM
PROGRAM 1/2
Note: * not available on all models.

P62, P80, and P82 Series Console

P62, P80, and P82 Series Consoles
The P62, P80, and P82 Club Settings information is accessed thru three submenus: About
(information about the machine), Equipment Usage (the usage stats), and the System Set-
tings (user defined workout limit configuration parameters):

"About menu"

l
type, location, software versions, internet/Wi-Fi connectivity) and the event and error
codes (EventLog and
"Equipment Usage menu" on the facing
l
(total workout time & distance, last work start/stop times).
"System Settings menu" on
l
setup parameters for Connectivity (internet/Wi-Fi), Display settings, TV settings,
Workout Limits settings, and Manage settings (save, import/export system settings).
"Maintenance menu" on
l
required maintenance status and reminder information.
About menu
menu: Club Settings (5,6,5,1,5,6,5) > About
Information about the machine hardware and software and the event and error codes.
ABOUT PARAMETER
CPA Event Log
CPA Event Log
1
Control Processing Assembly
Experience Series 700 Line Treadmills
Sets the use of a customized workout program.
Range: ON/OFF
Default: OFF
Note: The Total Body Workout can only be turned on in this Club
Settings menu.
below: General information about the machine (serial number, name,
1
CPA Event Log).
page 28: Provides the user defined club configuration and
page 31: Provides machine ASL status and running belt
menu: About > CPA Event Log
The CPA Event Log contains all console and base error diagnostic
messages and error codes including network connectivity inform-
ation, OEM test codes, and maintenance error codes.
.Note: Use the CPA Event Log and not the CPA Event Log to find
the machine maintenance error event codes. The CPA Event Log
only contains maintenance error codes.
menu: About > CPA Event Log
Club Settings Service mode (5651565)
DESCRIPTION
page: Machine workout usage information
DESCRIPTION
3 Standard Service Modes
26