Trim End Cap Covers Replacement
Trim End Cap Covers Replacement
ID
Trim End Cap - left
Trim End Cap - right
Removal Instructions
Repeat procedure for both the left
1. Remove the hood cover, see
2. Remove the left and right trim landing covers, see
on
page 54.
3. Remove the three #3 Phillips trim end cap cover (left
One fastener on the top, one fastener on the end, and one fastener on the bottom.
Retain fastener hardware for installation.
TIP:Use a short stub #3 Phillips screwdriver to remove the bottom end cap fastener.
Experience Series 700 Line Treadmills
Description
and right
"Hood Cover Replacement" on
5 Replacement Procedures
Covers and Panels Replacement
end cap covers.
page 56.
"Covers and Panels Replacement"
, right
) fastener screws.
62